Toro 39521 Operator's Manual page 40

Figure 39
4. If the oil level is low, wipe off the area around
the oil fill cap, remove cap and add the specified
oil until the oil level is at the Full mark on the
dipstick.
Note:
Do not overfill the engine with oil.
Changing the Engine Oil
Service Interval: After the first 5 hours
Every 100 hours
Note:
Dispose of the used oil at a recycling center.
1. Park the machine so that the drain side is slightly
lower than the opposite side to assure the oil
g025899
drains completely.
2. Shut off the engine, engage the parking brake,
remove the key, and wait for all moving parts to
stop before leaving the operating position.
3. Change the engine oil as shown in
Note:
Torque drain plug to 27 to 33 N∙m (20
to 24 ft-lb).
g025898
40
Figure
Figure 40
Figure 41
41.
g025980
g025979