Cisco 1700 Hardware Installation Manual page 7

Overview
Feature
RDIMMs
Internal component only;
not field-replaceable
Management ports
USB ports
VGA port
SFP ports
Supported SFP+
Serial console port
System power
Power consumption
Fans
Storage
RAID controller
1700
Two 16-GB
DDR4-2400-MHz
DIMMs
Two built-in 10-Gigabit Ethernet RJ45 OCP 3.0 NIC SFP+ ports (eth0 and eth1)
Support for 100/1000/10000 Mbps
The primary management port is eth0. You can use eth1, eth2, and eth3 as
secondary management or event ports.
Two USB 3.0 Type A
One 3-row 15-pin DB-15 connector
Enabled by default
Two fixed SFP+ ports (eth2 and eth3)
1
SFP-10G-SR (10 Gb)
SFP-10G-LR (10 Gb)
RJ-45 serial port running RS-232 (RS-232D TIA-561)
Two 1050-W AC power supplies
Hot-swappable and redundant as 1+1
2626 BTU/hr
Eight fans for front-to-rear cooling
Internal component only; not field-replaceable
Two 1.2-TB 10-K SAS
SFF HDDs
RAID 1, hot-swappable
1
The chassis has a dedicated internal riser for a PCIe-style Cisco modular RAID
controller card.
Internal component only; not field replaceable.
Cisco Secure Firewall Management Center 1700, 2700, and 4700 Hardware Installation Guide
2700 4700
Four 16-GB Eight 16-GB
DDR4-3200-MHz DDR4-3200-MHz
DIMMs DIMMs
SFP-10G-SR (10 Gb) SFP-10G-SR (10 Gb)
SFP-10G-LR (10 Gb) SFP-10G-LR (10 Gb)
SFP-25G-SR-S (25 Gb)
SFP-10/25G-LR-S (25
Gb)
SFP-10/25G-CSR-S (25
Gb)
Four 600-GB 10-K SAS Ten 1.2-TB 10-K SAS
SFF HDDs SFF HDDs
RAID 5, hot-swappable RAID 6, hot-swappable
Features
3