Cisco 1700 Hardware Installation Manual page 41

Installation, Maintenance, and Upgrade
Warning
Warning
Step 1
Remove the drive that you are replacing:
a) Press the release button on the face of the drive tray.
b) Grasp and open the ejector handle and then pull the drive tray out of the slot.
Figure 34: Remove the Drive
1 Ejector handle
Step 2
Remove the four drive-tray screws that secure the drive to the tray and then lift the drive out of the tray.
Statement 1090 Installation by Skilled Person
Only a skilled person should be allowed to install, replace, or service this equipment. See statement 1089
for the definition of a skilled person.
There are no serviceable parts inside. To avoid risk of electric shock, do not open.
Statement 1091 Installation by an Instructed Person
Only an instructed person or skilled person should be allowed to install, replace, or service this equipment.
See statement 1089 for the definition of an instructed or skilled person.
There are no serviceable parts inside. To avoid risk of electric shock, do not open.
Cisco Secure Firewall Management Center 1700, 2700, and 4700 Hardware Installation Guide
2 Release button
Remove and Replace a Drive
37