Advertisement
Available languages
Available languages
Every 3 months: cleaning trimming head
connector
1 Turn off the product and disconnect it from the
wall outlet.
2 Remove the comb (Fig. 15).
3 Pull the cutting unit off the appliance (Fig. 20).
4 Clean the trimming head connector and hair
chamber with the cleaning brush and/or rinse
them under the tap (Fig. 22).
5 Clean the inside of the trimming head with the
cleaning brush and/or rinse it under the tap (Fig.
21).
6 Carefully shake off excess water and let all parts
dry completely.
7 Press the trimming head back on the appliance.
Make sure the projection on the back of the
trimming head fits exactly onto the notch in the
hair chamber (Fig. 23).
Ordering accessories
To buy accessories or spare parts, visit
www.philips.com/parts-and-accessories or go to
your Philips dealer. You can also contact the Philips
Consumer Care Center in your country (see the
international warranty leaflet for contact details).
Storage
-
Store the product in the pouch supplied. Make
sure the product is dry before you store it in the
pouch.
Ordering accessories
To buy accessories or spare parts, visit
www.philips.com/parts-and-accessories or go to
your Philips dealer. You can also contact the Philips
Consumer Care Center in your country (see the
international warranty leaflet for contact details).
Disposal
-
This product contains a rechargeable NiMH
battery which must be disposed of properly.
-
Contact your local town or city officials for battery
disposal information. You can also call
1-888-224-9764 or visit www.call2recycle.ca for
battery drop-off locations.
-
For assistance, visit our website
www.philips.com/support or call 1-xxx-xxx-xxxx
toll free.
-
Your product is designed and manufactured with
high quality materials and components, which can
be recycled and reused. For recycling information,
please contact your local waste management
facilities or visit www.recycle.philips.com.
Warranty and support
If you need information or support, please
www.philips.com/support or call toll free:
1-866-800-9311.
Warranty restrictions
-
Philips North America LLC (USA) and/or Philips
Electronics Ltd (Canada) warrants its products for a
period of two years after the date of purchase. If
any defect due to faulty materials and
workmanship occurs within this two-year warranty
period, Philips North America LLC (USA) and/or
Philips Electronics Ltd (Canada) will repair or
replace the product at its expense.
-
Philips North America LLC (USA) and/or Philips
Electronics Ltd (Canada) will only pay for repair or
replacement if convincing proof is provided, for
instance by means of a receipt, that the day on
which service is claimed is within the warranty
period. Parts that are subject to wear (such as
cutting units and shaving heads) are not covered
by the terms of the international warranty.
-
The warranty is not valid if a defect is due to
damage caused by incorrect use, poor
maintenance (e.g. parts blocked by scale) or if
alterations or repairs have been carried out by
persons not authorized by Philips North America
LLC (USA) and/or Philips Electronics Ltd (Canada).
-
For the appliance to be used correctly, the user
should strictly adhere to all instructions included in
the user manual and should abstain from any
actions or uses that are described as undesired or
which are warned against in the user manual.
-
These warranty restrictions do not affect your
statutory rights.
Français (Canada)
Description générale (fig. 1)
1 Fixation de l'accessoire de tonte de précision
2 Élément de coupe
3 Molette de hauteur de coupe
4 Bouton de veille
5 Témoin de charge de la pile
6 Base de recharge
7 Fiche du stand de charge
8 Prise pour la petite fiche
9 Petite fiche
10 Bloc d'alimentation
11 Brosse de nettoyage
12 Étui
13 Sabot pour barbe longue
14 Sabot pour barbe courte
Renseignements importants sur la
sécurité
Lisez attentivement ces informations importantes
avant d'utiliser l'appareil et ses accessoires et
conservez-les pour un usage ultérieur. Les accessoires
fournis peuvent varier selon les différents produits.
Danger
-
Gardez le bloc d'alimentation au sec (fig. 2).
Avertissement
-
Pour charger la batterie, utilisez uniquement le
bloc d'alimentation détachable (HQ8505) fourni
avec l'appareil.
Advertisement
