GE SunSmart - Wireless Timer System Manual

OVERVIEW

Program

• Press to set/view programming.

Mode/Resume

• Toggle between Auto, Random (RDM), and Manual modes.
• In programming mode, deletes a set program.

On/Off

• Turns all wireless receivers within range On/Off
• Returns to Clock Mode when in programming mode.

Up/Down

• Scroll through settings options

Time

• Press to set the date/time.
• Press to confirm choices when programming.

RESET
USE PENCIL OR TOOTHPICK TO RESET ALL SETTINGS.

INSTALLATION

Your Device

1. On the back of the wireless timer, remove the plastic tab keeping the battery from making connection. You may need to remove the battery door if the tab doesn't pull out easily.
   1. If the clock has not started, remove the batteries and reinstall them following the "+" and "–" polarities, ensuring they match the marked information within the battery housing.
   2. Replace the plastic battery door ensuring that it snaps back into place.

Plug-In Receiver Module

1. Plug in the light or electronic device you wish the wireless timer to control into your receiver module.
2. Plug the receiver module into your wall outlet.
3. Make sure your light/device is turned to the On position. The lamp or device should not turn on.

SETTING THE DATE AND TIME

NOTE: If no buttons are pushed for 30 seconds while in programming mode, the timer will default back to the clock screen. Push the Time button until you return to the step where the timer reset.

1. Press RESET button on your wireless battery operated timer using a toothpick or a pencil and clear all settings.
2. Press the Time button once, and the year will be blinking. Press the Up or Down button to set the current year then press the Time button.
3. The month will be blinking. Press the Up or Down button to set the current month then press the Time button.
4. The day will be blinking. Press the Up or Down button to set the current day then press the Time button.
5. Daylight Savings Time (DST) needs to be set next. DST with On blinking will be displayed. If your area observes DST, then press the Time button and move to the next step. If your area does not observe DST, then set it to Off by pressing the Up or Down button and press the Time button to continue to next step.
   NOTE: DST will automatically reset the times in the timer to match the current time change, if DST is set to On. The default DST time change is 2:00 am, the second Sunday of March, and then the first Sunday in November.
6. Next step is to set the current time. The hour should be flashing, press the Up or Down button to select the current hour ensuring that AM/PM is correct then press the Time button.
7. The minute should be flashing, press the Up or Down button to select the current minute then press the Time button.

SETTING THE SUNSMART FEATURE

1. NOR (North) will be flashing on your screen, press the Up or Down button to choose your location.
   1. NOR (North)
   2. CEN (Central)
   3. SOU (South)
2. Press the Time Button once you have chosen your correct location.
3. Your programmed sunrise time will now be on your screen with the time blinking. If the time is correct, press the Time button and continue to the next step (If the time is not correct, press the Up or Down button to fine tune the correct time the sun rises in your location then press the Time button).
4. Your programmed sunset time will now be on your screen with the time blinking. If the time is correct, press the Time button and continue to the next step. (If the time is not correct, press the Up or Down button to fine tune the correct time the sun rises in your location then press the Time button).
5. Your timer should now be returned to the clock screen showing the current time.

SETTING THE UNIT ON/OFF PROGRAMS

NOTE: If no buttons are pushed for 30 seconds while in programming mode, the timer will default back to the clock screen. Push the Program button until you return to the correct program you were setting, then press the Time button to return to the correct step where the timer reset (you can scroll through all 7 On/Off programs by pushing the Program button).

1. Press the Program button to begin setting the times you wish your connected light or electronic device to turn On/Off.
2. "-- -- 1 ON" will be on the screen, press the Time button to program your first On program time.
3. The day of the week will be flashing, press the Up or Down button to choose the days you wish this program to work. Your options are:
   1. Monday thru Sunday
   2. Each day individually
   3. Monday thru Friday
   4. Saturday & Sunday
   5. Monday, Wednesday & Friday
   6. Tuesday & Thursday
4. Press the Time button once you have chosen the days of the week you want to control the device.
5. The hour will now be blinking. You have three options to choose from:
   1. Sunset time: Press the Down button once to choose your pre-programmed sunset time or scroll until the preset programmed time shows on the screen. If you choose to use the preprogrammed sunset time, press the Time button and then press the Program button to move to 1 Off program and skip to step 6.
   2. Sunrise Time: Press the Down button a second time to choose your pre-programmed sunrise time or scroll until the preset programmed time shows on the screen. If you choose to use the pre-programmed sunrise time, press the Time button and then press the Program button to move to 1 Off program and skip to step 6.
   3. Custom Time: Pressing the Down button a third time or scrolling with the Up button will let you manually select any hour and minute desired.
      1. If you chose to use a custom time, the hour will be blinking. Keep pressing the Down button to choose the hour you wish the timer to turn on (keeping in mind AM/PM). Press the Time button once you have selected your hour.
      2. The minute will now be blinking, press the Up or Down button to choose the minute then press the Time button.
      3. Press the Program button again to program your first Off program time.
6. The screen should read "-- -- 1 OFF". Repeat the previous steps above for choosing your days of the week and program time.
7. Repeat these steps for up to 7 different programs setting as many On/Off cycles as desired. At any time, push the On/Off button to complete programming and return to clock mode.

DELETING A PROGRAM

Press the Program button until you get to the program you would like to delete. Press the Mode/Resume button and the program setting will be deleted.

UNIT MODE OPTIONS

• AUTO: Timer functions using all programs you have set.
• RDM (Random): Timer uses all programs you have set +/- 30 minutes of On/Off times giving your home a more lived in look while away.
• None (Manual mode): Timer does not use programs at all and is only on manual mode.

USING THE DEVICE AS A REMOTE CONTROL

1. Simply press the On/Off button to override timer programs to turn your lights or devices On/Off.
2. If timer is in AUTO mode, it will follow the next timer program setting to turn your light or device On/Off.
3. If the timer is in RDM (Random) mode, it will follow the next timer program setting to turn your light or device On/Off within an hour.
4. If the timer is in Manual Mode (Blank on your screen not showing AUTO or RDM), then the light or device will stay On/Off until you change your timer mode option or you manually use the On/Off button again.

See www.jascoproducts.com for troubleshooting and frequently asked questions (FAQs).

BATTERY-OPERATED TRANSMITTER

BATTERIES MAY LEAK HARMFUL LIQUIDS OR IGNITABLE MATERIALS OR EXPLODE CAUSING INJURY AND PRODUCT DAMAGE

• DO NOT MIX OLD AND NEW OR OTHER BATTERY TYPES
• REPLACE ALL BATTERIES AT THE SAME TIME
• REPLACE FULLY DISCHARGED BATTERIES IMMEDIATELY
• REMOVE BATTERIES IF PRODUCT IS TO BE UNUSED FOR AN EXTENDED PERIOD OF TIME.

AC POWERED RECEIVER OUTLET

RISK OF ELECTRIC SHOCK

• DO NOT USE WITH AN EXTENSION CORD
• FULLY INSERT PLUG
• KEEP CHILDREN AWAY
• USE INDOORS ONLY
• DO NOT USE IN WET LOCATIONS
• UNPLUG BEFORE CLEANING

RISK OF FIRE

• DO NOT EXCEED ELECTRICAL RATINGS
• DO NOT USE TO CONTROL APPLIANCES THAT CONTAIN HEATING ELEMENTS (COOKING APPLIANCES, HEATERS, IRONS, ETC.)

Total ratings for both outlets:
125V 60 Hz:
15A General Purpose
15A Resistive
1000W Tungsten
1/3HP
500VA Electronic Ballast
120VAC 60 Hz:
8.3A Ballast

MADE IN CHINA
GE is a trademark of General Electric Company and is under license by Jasco Products Company LLC, 10 E. Memorial Rd., Oklahoma City, OK 73114.
This Jasco product comes with a 1-year limited warranty. Visit www.jascoproducts.com for warranty details and product registration.
Questions? Contact us at 1-800-654-8483 between 7:30AM—5:00PM CST.

Documents / Resources

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download GE SunSmart - Wireless Timer System Manual