Changing The Tactical Inhibit Password; Radio Inhibit - Motorola APX 900 User Manual

8 Press the Menu Select button directly below Ok .
9 Re-enter the new password.
10 Press the Menu Select button directly below Ok .
The password is updated.
If the two passwords do not match, repeat
NOTE: If you enter three incorrect old passwords, the radio exits the password feature. You
cannot access this feature again until you turn the radio off and on.
7.17.3

Changing the Tactical Inhibit Password

The Tactical Inhibit Password is required for the Radio Stun and Radio Kill features. You can set up to
eight characters for this password.
Procedure:
1 or to Pswd.
2 Press the Menu Select button directly below Pswd.
The display shows Change Password screen.
3 or to Tactical Inh Encode Pswd.
4 Press the Menu Select button directly below Sel .
5 Enter the old password.
6 Press the Menu Select button directly below Ok .
7 Enter the new password.
8 Press the Menu Select button directly below Ok .
9 Re-enter the new password.
10 Press the Menu Select button directly below Ok .
The password is updated.
If the two passwords do not match, repeat
NOTE: If you enter three incorrect passwords, the radio exits the password feature. You
cannot access this feature again until you turn the radio off and on.
7.18

Radio Inhibit

This feature allows the system administrator to put a radio into a nonfunctional state when the radio is
missing or in an unknown hand. The radio stays in this state regardless of its power changes.
NOTE:
If the radio has Intersystem roaming capability, the system administrator is able to put the radio
into a nonfunctional state when the missing radio roams to another system.
The radio can only be uninhibited by receiving an uninhibited command from the system
administrator.
step 5 through step 10.
step 5 through step
MN003441A01-AP
Chapter 7 : Advanced Features
10.
93