Safety; O Bus Configuration; O Bus Service; O Bus Diagnostics - ABB ACS880-x04 Firmware Manual

Primary control program

Table of Contents

442 Parameters

0.00 ... 100000.00

200 Safety

This group contains parameters related to the optional FSO-xx safety functions module. For details, refer to

the documentation of the FSO-xx module.

configuration

207 I/O bus service

208 I/O bus diagnostics

209 I/O bus fan

identification

These groups contain parameters related to the distributed I/O bus, which is used with some drives for

monitoring the cooling fans of the cabinet system. For details, refer to CIO-01 I/O module for distributed I/O

bus control user's manual (3AXD50000126880 [English]).

Defines the capacitance of a custom sine filter, ie. when

95.15 Special HW settings

If the capacitors are star/wye-connected, enter the

capacitance of one leg into the parameter.

If the capacitors are delta-connected, multiply the capacitance

of one leg by 3 and enter the result into the parameter.

Note: For an ABB sine filter

this parameter is set automatically and should not be

Capacitance of custom sine filter.

FSO-xx settings.

Distributed I/O bus settings.

These groups are only visible with a BCU control unit.

bit 3 is activated.

(95.15 Special HW settings

Table of Contents