Prior To Entries; Preparations For Entries; Error Warning; Sample Receipt - Sharp UP-700 Instruction Manual

4

Prior to Entries

Preparations for Entries

Receipt and journal paper rolls
If the receipt and journal paper rolls are not set in the machine or the existing rolls are low in supply,
install new ones according to section "Installing and Removing the Paper Roll" under "Operator
Maintenance."
Receipt ON/OFF function
You can disable receipt printing in the REG mode to save paper using the receipt function. To disable
receipt printing, press the
the key. When the function is in the OFF status, the receipt off indicator "R" is highlighted.
•
Your register will print reports regardless of the receipt state. This means that the receipt roll
NOTE
should be installed even when the receipt state is "OFF".

Error Warning

In the following examples, your POS terminal will go into an error state accompanied with a warning beep
and the error message on the display. Clear the error state by pressing the
action to remedy the problem.
• When you exceed a 32-digit number (entry limit overflow):
Cancel the entry and re-enter a correct number.
• When you make an error in key operation:
Clear the error and try the entry again.
• When you make an entry beyond a programmed amount entry limit:
Check to see if the entered amount is correct. If it is correct, it may be possible to enter it in
the MGR mode. Please contact your manager.
• When an including-tax subtotal exceeds eight digits:
Clear the error display by pressing the

Sample Receipt

The print format will vary depending on the printer you use.
18
key and select RCP S.W. from the menu and turn the receipt OFF by press
MISC
FUNC
Date
Consecutive no.
Item entry
key and press a media key to finalize the transaction.
CL
Machine no.
Server name/server code
Time
Sales total
Cash amount tendered
Change due
REG MODE
key and take the proper
CL