Prior To Making Entries; Preparations For Entries; Receipt Paper Roll; Receipt On/Off Function - Sharp ER-A280F Instruction Manual

3

Prior to Making Entries

Preparations for Entries

I Receipt paper roll
If the receipt paper roll is not set in the machine or it is getting low, install a new one according to section
"Installing and Removing the Paper Roll" under "Operator Maintenance."
I Receipt ON/OFF function
You can disable receipt printing in the REG mode to save paper using the receipt function. To disable
receipt printing, press the
indicator "R" is highlighted.
Your register will print reports regardless of the receipt state. This means that the receipt roll
NOTE
must be installed even when the receipt state is "OFF".
I Clerk assignment
Prior to any item entries, a clerk must enter his/her clerk codes into the register.
To sign on:
To sign off:
NOTE
Your register can provide the clerk + cashier system instead of current system (clerk only system).
If you want to change the system, please consult your authorized SHARP dealer.
Cashier assignment (Clerk + cashier system)
To sign on:
To sign off:
˘
RCPT
key to select "OFF". When the function is in the OFF status, the receipt off
SW.
V
Clerk code
V
CSR
Cashier code
#
CSR
#
(In case secret code is 0000)
e
or
Secret code
(In case secret code is 0000)
e
Secret code
A
A
or
23