Honeywell L5210 Series Installation And Setup Manual page 45

Program Reporting (Continued)
SCREEN
Options
PBX
Call Wait Cancel
Number of Reports
2 Reports
Alarm Report Delay
30 Sec.
First Report Offset
6 Hrs
Report Frequency
Never
Downloader
Phone Answer
Yes
Modem Speed
Slow
Ans. Machine Defeat
Yes
Callback Number
Select "Options". The System displays the following options:
PBX
Number of Reports
First Report Offset
Note: This field is not available on the LYNX Touch L7000/L7000CN.
Select "PBX", and enter PBX Prefix on the displayed keypad.
Note: This field is not available on the LYNX Touch L7000/L7000CN.
Select "Call Wait Cancel", and enter Call Wait Cancel Prefix on the displayed keypad
Select "Number of Reports"
LYNX Touch (L5210/L7000)
The system scrolls between the following options:
1, 2, 3, 4, 5 and 6 Reports
LYNX Touch (L5210CN/L7000CN) Canada
The system toggles between "Unlimited" and "10 Reports".
Select "Alarm Report Delays". The System scrolls between the following options:
15 Sec.
30 Sec.
45 Sec.
No delay
SIA The Alarm Report Delay (burglary abort window) must be set to a minimum of 15
seconds. The sum of the Alarm Report Delay (burglary abort window) and the entry
delays should not exceed 1 minute.
Note: The L5210/L7000 control validates the data entered in this field. If the selection is not
valid the control will emit a single long beep indicating that the selection has been rejected.
The control replaces the selection with the default value "30 Sec".
Select "First Report Offset" for the Test Report. The System scrolls between the following
options:
6 Hrs
12 Hrs
18 Hrs
24 Hrs
Select "Report Frequency" for the Test Report. The System scrolls between the following
options:
Never
Every Day
Every 7 Days
Every 30 Days
Select "Downloader". The System displays the following options:
Phone Answer
Ans.Machine Defeat
Ring Counter
Note: This field is not available on the LYNX Touch L7000/L7000CN.
Select "Phone Answer", the system toggles between "Yes" and "No".
(Future Use)
Note: This field is not available on the LYNX Touch L7000/L7000CN.
Select "Ans. Machine Defeat", the system toggles between "Yes" and "No".
Select "Callback Number" and enter callback number on the displayed keypad.
LYNX Touch Installation and Setup Guide
Programming the Control
ACTION
Call Wait Cancel
Alarm Report Delay
Report Frequency
Modem Speed
Callback Number
Flexible Callback
Number
- 45 -