Honeywell L5210 Series Installation And Setup Manual page 36

Hide thumbs Also See for L5210 Series:
Table of Contents

Advertisement

LYNX Touch Installation and Setup Guide
Programming the Control
Program Zones (Continued)
SCREEN
Zone Description 1
Device Type
Response Type
Not Used
Alarm Report
Yes
Chime
Disabled
Zone Description 1/Zone Description 2
When programming the Zone Description, after entering the first letter of the description on the
keypad you can use the up
preprogrammed zone descriptions. For a list of the pre-programmed Zone Descriptors, please
visit http://www.security.honeywell.com/hsc/resources/MyWebTech
Select "Zone Description 1 or Zone Description 2". Using the displayed keypad enter Zone
Description 1 or Zone Description 2. The system announces the Zone Description. Enter
"Done", when you are finished. The system returns to the Zone Programming page.
Device Type
Select "Device Type". The system displays the following options:
New
Window
Glass Break
Heat Sensor
Use the down
arrow to scroll to the next page of options:
Temperature
Environmental
Fire
Garage Door
Response Type
1. Select "Response Type". The system displays the specific options, which are dependant
upon the Device Type that was selected for the zone. Use the down
next page of options. Use the
Not Used
Entry Exit 2
Interior Follower
24 Hour Silent
24 Hour Auxiliary
Interior With Delay
Carbon Monoxide
Arm Stay
Disarm
Silent Burglary
Resident Response
General Response
Day/Night
2. Select the desired Response Type and select "Save". The system will return to the Zone
screen.
Note: For threshold monitoring to be configurable on the LYNX Touch Z-wave thermostat
screen, the respective zones will first need to be assigned with a response type in zone
programming. The recommended response type is Trouble.
Alarm Report
Note: This field is for Alarms. If Response Type "Trouble" is set up and Alarm Report is set to
"No" the system will still report if Report Alarms was enabled in the Reporter
programming.
Select "Report" to toggle between "No" or "Yes". Select "Save".
Chime
Note: Chime only applies to entry/exit, perimeter and interior zone types.
Select "Chime" to scroll through the selections that include "Disabled" and ten optional chimes.
Select "Save".
ACTION
and down
arrows to scroll through the available
Door
Motion Sensor
Smoke Detector
Carbon Mono. Det.
Flood
Medical
Police
Other
arrow to return to the previous page.
Entry Exit 1
Perimeter
Trouble
24 Hour Audible
Fire No Verification
Monitor
Garage
Arm Away
No Response
Resident Monitor
General Monitor
Fire With Verification
Garage Monitor
- 36 -
arrow to scroll to the

Advertisement

Table of Contents
loading

This manual is also suitable for:

L7000 series

Table of Contents