Changing The Fuses Of Individual Power Consumers - Husqvarna 250 XC TPI 2021 Owner's Manual

14.5

Changing the fuses of individual power consumers

Info
The fuse box containing the fuses of individual power consumers is located under the seat.
Preparatory work
–
Press and hold the switch-off button
idling until the engine stops.
–
Remove the seat. (
Main work
–
Open fuse box cover
–
Remove the faulty fuse.
Guideline
Fuse 1 - 10 A - EFI control unit, oil pump, electronic fuel
injection, diagnostics connector
Fuse 2 - not assigned
Fuse 3 - not assigned
V01676-10
Fuse 4 - 5 A - fuel pump
Fuses SPARE - 10 A/5 A - spare fuse
Info
A faulty fuse has a burned-out fuse wire
Warning
Fire hazard Incorrect fuses overload the electrical sys-
tem.
–
Only use fuses with the required ampere value.
–
Do not bypass or repair fuses.
–
Insert spare fuse with the correct rating.
Fuse (75011088010) (
Fuse (75011088005) (
Tip
Insert a spare fuse in the fuse box so that it is available
if needed.
–
Check that the power consumer is functioning properly.
–
Close the fuse box cover
Finishing work
–
Mount the seat. (
ELECTRICAL SYSTEM 14
while the engine is
p. 59)
1
.
A
p. 134)
p. 134)
1
.
p. 59)
.
101