Changing The Fuses Of Individual Power Consumers - Husqvarna TX 300i 2021 Owner's Manual

14.5

Changing the fuses of individual power consumers

Info
The fuse box containing the fuses of individual power consumers is located under the seat.
–
Take off protection caps
–
Remove faulty main fuse
Info
A faulty fuse has a burned-out fuse wire
A spare fuse
–
Insert a new main fuse.
Fuse (58011109110) (
–
Check that the electrical system is functioning properly.
Tip
Insert a spare fuse so that it is available if needed.
–
Mount the protection caps.
V01613-10
–
Mount starter relay
–
Mount the EFI control unit
V01612-10
Finishing work
–
Mount the seat. (
–
Install the air filter box cover. (
Preparatory work
–
Press and hold the switch-off button
idling until the engine stops.
–
Remove the air filter box cover. (
–
Remove the seat. (
ELECTRICAL SYSTEM 14
4
.
5
.
A
6
is located in the starter relay.
p. 134)
3
onto the holder and route the cable.
1
on the rubber lugs
p. 62)
p. 62)
while the engine is
p. 62)
p. 61)
.
2
.
101