Service Schedule 9; Additional Information; Required Work - Husqvarna 250 XC TPI 2021 Owner's Manual

Table of Contents

Advertisement

9.1

Additional information

Any further work that results from the compulsory work or from the recommended work must be ordered sepa-
rately and invoiced separately.
Different service intervals may apply in your country, depending on the local operating conditions.
Individual service intervals and scopes may change in the course of technical developments. The most up-to-date
service schedule can always be found on KTM Dealer.net. Your authorized KTM dealer will be happy to advise
you.
9.2

Required work

Read out the fault memory using the KTM diagnostics tool.
Check that the electrical system is functioning properly.
Check and charge the 12-V battery.
Change the gear oil.
(
p. 120)
Check the front brake linings. (
Check the brake linings of the rear brake. (
Check the brake discs. (
p. 79)
Check the brake lines for damage and leakage.
Check the rear brake fluid level. (
Check the free travel of the foot brake lever. (
Check the frame.
(
p. 74)
Check the link fork.
(
p. 74)
Checking the fork bearing for play.
Checking the shock absorber heim joint for play.
Check the shock absorber linkage.
Check the tire condition. (
Check tire pressure. (
p. 95)
Check the wheel bearing for play.
Check the wheel hubs.
Check the rim run-out.
Check the spoke tension. (
Check the chain, rear sprocket, engine sprocket, and chain guide. (
Check the chain tension. (
Grease all moving parts (e.g. side stand, hand lever, chain, etc.) and check for smooth
operation.
Check/correct the fluid level of the hydraulic clutch. (
Check the front brake fluid level. (
Check the free travel of the hand brake lever. (
Check steering head bearing play. (
Change the spark plug and spark plug connector.
Check all hoses (e.g. fuel, cooling, bleeder, drainage hoses, etc.) and sleeves for crack-
ing, tightness, and correct routing.
p. 82)
p. 88)
p. 86)
p. 85)
p. 95)
p. 96)
p. 69)
p. 76)
p. 80)
p. 79)
p. 53)

SERVICE SCHEDULE 9

Every 40 operating hours
Every 20 operating hours
Every 10 operating hours
After 5 operating hours
After 1 operating hour
p. 71)
33

Advertisement

Table of Contents
loading

This manual is also suitable for:

300 xc tpi 2021250 xc tpi us 2021300 xc tpi us 2021F6375u5F6475u5

Table of Contents