Naming The Radio Or Ram+ Stations - Standard Horizon Quest-X GX1500S Owner's Manual

12.12 NAMING THE RADIO OR SECOND STATION MIC OR HANDSET
This selection allows you to provide the name to the radio and optional RAM+
Mic's when connected.
1. Press and hold down the [ CALL ( MENU )] key until
" Radio Setup
2. Press the [ ENT ] key, then select "
Radio Setup
"
knob.
3. Press the [ ENT ] key.
4. Turn the CHANNEL selector knob to select the Unit
(" Radio " or "
[ ENT ] key.
5. Turn the CHANNEL selector knob to scroll through
the first letter of the channel name.
6. Press the [ ENT ] key to store the first letter in the name
and step to the next letter to the right.
7. Repeat step 6 and 7 until the name is complete. The
name can consist of up to twelve characters, if you
do not use all twelve characters press the [ ENT ] key
to move to the next space. This method can also be
used to enter a blank space in the name. To clear the
previous letter, press the [ CLR ] key.
8. Press and hold the [ ENT ] key to enter the name and
return to the "
9. If you want to enter the name of another unit, repeat steps 4 through 8.
10. To exit this menu and return to radio operation mode press the [ 16/9 ] key.
GX1500S
" menu appears.
" menu with the CHANNEL selector
RAM1 ") to be named, then press the
Unit Name
" menu.
Unit Name
" in the
Page 63