Setting Up Individual Ringer - Standard Horizon Quest-X GX1500S Owner's Manual

11. If a mistake was made entering in the name or the MMSI number repeat
pressing the [ H/L ( NAV )] key until the wrong character is selected, then move
the channel knob to correct the entry.
12. To store the data entered, press and hold the [ ENT ]
key.
13. To enter another individual address, repeat steps 4
through 12.
14. To exit this menu and return to radio operation mode press the [ 16/9 ] key.
Selecting "Next" or "Exit" will automatically save the name and MMSI
number into memory.
11.5.2 Setting up Individual Reply
Allows setting up the radio to automatically (default setting) or manually re-
spond to a DSC Individual call requesting you to switch to a working channel for
voice communications. When Manual is selected the MMSI of the calling ves-
sel is shown allowing you to see who is calling. This function is similar to caller
id on a cellular phone.
1. Press and hold down the [ CALL ( MENU )] key until
" Radio Setup
2. Turn the CHANNEL selector knob to select "
Setup
" menu.
3. Press the [ ENT ] key, then select "
the CHANNEL selector knob.
4. Press the [ ENT ] key.
5. Turn the CHANNEL selector knob to select "
or " Manual ."
6. Press the [ ENT ] key to store the selected setting.
7. To exit this menu and return to radio operation mode
press the [ 16/9 ] key.
GX1500S
" menu appears.
NOTE
DSC
INDIV Reply " with
Auto "
Page 39