TOP OVEN DOOR
REPLACING THE INNER PANE OF
GLASS
1 .
Make sure the door is locked open
(see fig. 8.9c).
2 .
Replace the inner pane:
•
Check that the four rubber pads are in
place ("D" in fig. 8.11a).
IMPORTANT: It is advisable, while
refitting the glass, to keep pressed in
position the four rubber pads "D", by a
finger, to avoid breakage or slippage
of the rubber pads themselves (fig.
8 .11b) .
•
Check that you are holding the pane
the correct way . You should be able to
read the wording on it as it faces you .
•
Insert the pane in the left "E" and right
"F" slide guides (fig. 8.11b), and gently
slide it to the retainers "H" (fig. 8.11c).
•
Reassemble the seal "G" in the correct
way (fig. 8.11d) by hooking the no. 3
fixing hooks in the proper holes (fig.
8 .11e) .
•
Unlock the oven door by opening it
completely and closing the lever "A"
on the left and right hinges (fig. 8.11f).
Fig. 8.11c
The oven door
has a sealed
gasket in the
top part .
It is normal to see a gap between the
top edge of the inner glass and the
sealed gasket . This allows the cooling
air circulation .
32
Fig. 8.11b
H
Fig. 8.11f
D
E
G
Fig. 8.11d
A
Fig. 8.11a
F
Fig. 8.11e