Traction Control System - Yamaha X-MAX 400 ABS 2018 Owner's Manual

Instrument and control functions
 This ABS has a test mode which
allows the owner to experience
the pulsation at the brake levers
when the ABS is operating. How-
ever, special tools are required, so
please consult your Yamaha deal-
er.
NOTICE
Be careful not to damage the wheel
sensor or wheel sensor rotor; other-
wise, improper performance of the
4
ABS will result.
1
1. Front wheel sensor
2. Front wheel sensor rotor
ZAUM1520
1. Rear wheel sensor
2. Rear wheel sensor rotor
2
1
2

Traction control system

The traction control system (TCS)
helps maintain traction when acceler-
ating on slippery surfaces, such as un-
paved or wet roads. If sensors detect
that the rear wheel is starting to slip
(uncontrolled spinning), the traction
ECA20100
control system assists by regulating
engine power until traction is restored.
When traction control has engaged,
the " " indicator light will flash. You
may notice changes in engine re-
sponse or exhaust sound.
WARNING
The traction control system is not a
substitute for riding appropriately
for the conditions. Traction control
cannot prevent loss of traction due
to excessive speed when entering
turns, when accelerating hard at a
sharp lean angle, or while braking,
and cannot prevent front wheel slip-
ping. As with any vehicle, approach
surfaces that may be slippery with
caution and avoid especially slip-
pery surfaces.
Setting the traction control system
1
ZAUM1498
1. Traction control system indicator light "
2. Traction control system display
4-16
EAU78611
EWA18860
2
"