Traction Control System - Yamaha NIKEN GT 2020 Owner's Manual

1
2
1. Rear wheel sensor
2. Rear wheel sensor rotor
Instrument and control functions

Traction control system

The traction control system (TCS)
helps maintain traction when acceler-
ating on slippery surfaces, such as un-
paved or wet roads. If sensors detect
that the rear wheel is starting to slip
(uncontrolled spinning), the traction
control system assists by regulating
engine power as needed until traction
is restored.
WARNING
The traction control system is not a
substitute for riding appropriately
for the conditions. Traction control
cannot prevent loss of traction due
to excessive speed when entering
turns, when accelerating hard at a
sharp lean angle, or while braking,
and cannot prevent front wheel slip-
ping. As with any vehicle, approach
surfaces that may be slippery with
caution and avoid especially slip-
pery surfaces.
3-22
EAU76317
1 2
1. "TCS" button
2. TCS display
EWA15433
3. Traction control system indicator light "
The " " indicator light flashes when
traction control has engaged. You may
notice slight changes in engine and ex-
haust sounds when the system has en-
gaged.
The " " indicator light comes on
when traction control has been turned
off.
The TCS display indicates the current
TCS setting. There are three settings.
TCS "OFF": Turns the traction control
system off.
TCS "1": Minimizes traction control
system assist.
3
3
"