Honeywell CENTRALINE EAGLE User Manual page 70

BASIC OPERATION PROCEDURES
EN2Z-0971GE51 R0515
2. Turn the rotate&push button to navigate to and highlight Schedules.
3. Push the rotate&push button. The list of SCHEDULES is displayed.
4. Turn the rotate&push button to navigate to and highlight the schedule to
which you want to add switch points.
5. Push the rotate&push button.
The schedule is displayed.
6. Turn the rotate&push button to navigate to and highlight the day.
7. Push the rotate&push button.
The day is displayed.
8. On the controller housing, press the soft key right adjacent to the Add
command symbol .
The EDIT EVENT screen is displayed.
9. Set the time and value as described in the "Adjusting and Saving Values and
Options" section and the "Enable/Disabling Options" sections.
10. Turn the rotate&push button to navigate to and highlight the OK command.
70
EAGLE CONTROLLER