Table of Contents
Advertisement
BASIC OPERATION PROCEDURES
EN2Z-0971GE51 R0515
The Ones are flashing.
15. Turn the rotate&push button to change (increase or decrease) the value.
Higher digits of the value are automatically increased or decreased.
16. Push the rotate&push button. The new value is displayed and the cursor
jumps to an OK field which displays.
At this point you can pre-save the value, or you can switch to digits before or
after the decimal place which are not displayed initially by the original value.
To pre-save the value, please refer to step 17.
To display and adjust lower digits (tenths, hundreds. etc.) or higher digits
(any higher than the original), please refer to step 18.
17. Push the rotate&push button while the OK field is highlighed.
The changed value is highlighted.
To save the value, please refer to step 21.
18. To adjust lower or higher digits, do not pre-save the value by pushing the
rotate&push button, instead turn the rotate&push button clockwise or
counterclockwise to display the higher or lower digits. Depending on the turn
direction, the first, second and proximate digits after or before the decimal
point will be displayed and can be adjusted (see following examples).
22
EAGLE CONTROLLER
Advertisement
Table of Contents
