Cd Operation; Switching To Cd Mode; Selecting Tracks; Pausing Playing - AEG CS FMP 400 Manual

OPERATION
switched to that EON linked station,
but no information could not be
received because the EON linked
station is located too far from that
area. So the radio is switched back
to current station again. In above
operation, a customer listens to a
wrong program or mute sound for a
while.
EON TA LOCAL mode
When the filed strength level of
EON linked is less than threshold
level, the radio does not switch that
station, and a customer can hardly
listen to any disturbances.
When EON TA LOCAL mode is
selected, "EON TA LO" on numeric
display is indicated for a few
seconds.
EON TA DISTANCE mode
EON TA switch is tried to
implemented by the information of
current station.
When EON TA DISTANCE mode is
selected, "EON TA DX" on numeric
display is indicated for a few
seconds.
The RDS data used are the PI, PS,
AF, TP, TA, EON and PTY data.
PI: Program Identification code
Code for identifying programs
PS: Program Service Name
Broadcast station name data
expressed in alphanumerically
characters
AF: Alternative Frequencies
Frequency list of broadcasting
Stations transmitting the same
program
TP: Traffic Program Identification
Identification data for traffic
information-broadcasting
station
TA: Traffic Announcement
Identification Identification data
showing traffic information is being
transmitted or not
EON: Enhanced Other Networks
Information
Broadcasting information on PI,
AF, TP, TA, etc, relating to
networks other than the network
used for current reception
PTY: Program Type Code
Contents of programs such as
news, light music, sports etc.

CD OPERATION

SWITCHING TO CD MODE

If there is no CD inserted in the
driver:
Gently insert the CD with the printed
side uppermost into the CD
compartment until you feel some
resistance,. The CD is drawn into the
driver automatically , CD playback
begins.
If a CD is already inserted in the
driver:
Keep pressing MODE button (6)
shortly until the CD mode display
appears.

SELECTING TRACKS

Press TUN/TRK
TUN/TRK button (17) to move to
the previous track or the following
track. Track number shows
on display.
Hold TUN/TRK
or TUN/TRK button
fast reverse of fast forward, CD play
starts from when you release the
button.

PAUSING PLAYING

Press PAU button (20) to pause CD
player, Press it again to resume play.
PREVIEWING ALL TRACKS
Press SCN button (21) to play first
several seconds of each track on the
13
button (16) or
button (17)
(16) to