Din Rear-Mount (Method B) - AEG CS FMP 400 Manual

INSTALLATION

DIN REAR-MOUNT (Method B)

If your vehicle is a Nissan, Toyota, follow
these mounting instructions.
Use the screw holes marked T (Toyota),
N (Nissan) located on both sides of the
unit to fasten the unit to the factory radio
mounting brackets supplied with your
vehicle.
Factory Radio
Mounting Bracket
Screw
Hook
To fasten the unit to the factory radio
mounting brackets.
1. Use a screwdriver to loose the hook's
screws on the front left and right sides
of the unit and remove the hooks.
2. Align the screw holes on the bracket
Note: the outer trim ring, sleeve
and the metal strap are not used
for method B installation.
Side View showing
Screw Holes marked
T, N
Screw
Dashboard or Console
5
with the screw holes on the unit, and
then tighten the screws (5x5mm)on
each side.