Operation - AEG CS FMP 400 Manual

OPERATION

Receiving a RDS station.
AF starts blinking if the
broadcasting signal getting worse.
ALARM will be displayed when an
emergency broadcasting is received,
meanwhile sound output level will be
adjusted to the preset output level
automatically when the volume
control is set at minimum.
- Regional Program Operation
Press AF button (3) for several
seconds to switch on or off
region mode.
Some broadcasting stations change
their program from normal
broadcasting to regional
broadcasting for a certain time
period. When region is on, the
current listening program remains
unchanged. When region is off, it
allows the reception moves to the
regional station.
- Using PTY to Select Program
PTY button (1) is operated as
follows:
PTY MUSIC group PTY SPEECH group
While selecting PTY engagement, PTY
its selection is implemented by
preset buttons as described in notes.
PTY
When PTY is selected, the radio
starts to search corresponding PTY
information, and stops if the
corresponding PTY information is PTY
detected.
If corresponding PTY information is PTY
not existed any more, PTY engaging
is automatically exit to normal mode.
Notes:
When PTY mode is engaged, the PTY
PTY switch is shared as follows:
PTY MUSIC group PTY SPEECH group
According to above 2 allotted group,
the preset number is used for PTY
selection as follows:
- Listening to Traffic Announcement
PTY off
PTY
PTY
PTY off
12
MUSIC group
* POP M, ROCK M
* EASY M, LIGHT M
* CLASSICS, OTHER M
* JAZZ, COUNTRY
* NATION M, OLDIES
* FOLK M
SPEECH group
*NEWS, AFFAIRS, INFO
*SPORT, EDUCATE, DRAMA
*CULTURE, SCIENCE, VARIED
*WEATHER, FINANCE, CHILDREN
*SOCIAL, RELIGION, PHONE IN
*TRAVEL, LEISURE, DOCUMENT
TA button (2) is operated as follows:
When pressed short, it is engaging
whether TA mode on or off.
When TA mode is on and a traffic
announcement is transmitted:
When the unit was in CD (MP3), it
will switch temporarily to radio
mode.
Temporary switch over to an EON
linked station when EON detects a
traffic announcement on that other
program.
If the volume level was under the
threshold point it will be raised to
the threshold point. But the user
changed the volume level, which
was more than the threshold point
(min. TA volume level), it will be set
to the last level.
When TA mode is on, TA of
individual segment is turned on.
When a TP station is received, TP
of individual segment is turned on.
TA interruption function
The current traffic announcement is
cancelled by pressing this key.
But the TA mode will not be off.
When pressed long, it is selected
EON TA LOCAL/EON TA
DISTANCE mode.
The purpose of this key is to reduce
unwanted EON TA switching, which
EON TA information was received
from current station and the radio