Before Use - Black & Decker BXMM1000E Instructions For Use Manual

• Check the state of the supply cord. Damaged or tangled
cables increase the risk of electric shock.
• Do not touch the plug with wet hands.
• The appliance must be used and placed on a flat, stable
surface.
• Do not place the appliance on hot surfaces, such as
cooking plates, gas burners, ovens or similar.
• Take care to avoid starting the appliance involuntarily.
• Before using the appliance, ensure that the blade is
properly fixed in place.
• Blades are sharp and could cause harm, be careful and
avoid direct contact with the blades' cutting edges. Pay
special attention when handling the blades, during as-
sembly and disassembly operations and during cleaning.
• Do not touch any of the appliance's moving parts while it
is operating.
• Exercise precaution after employing the stop operation on
the appliance as the blade/s will continue moving from the
effect of its own mechanical inertia.
• Do not leave the appliance out in the rain or exposed
to moisture. If water gets into the appliance, this will
increase the risk of electric shock.
DESCRIPTION
A Switch button (ON/OFF/Reverse)
B Body
C Mincing head lock button
D Mincing head installation place
E Pusher
F Tray
G Mincing head
H Screw
I Crossed blade
J Cutting plate (3 sizes)
K Fixing ring
L Sausage
M Kebbe
N Tomato juicer (*)
(*) Only available in the model BXMMA1000E.
If the model of your appliance does not have the accesso-
ries described above, they can also be bought separately
from the Technical Assistance Service.
INSTRUCTIONS FOR USE

BEFORE USE

• Make sure that all products' packaging has been re-
moved.
• Before using the product for the first time, clean the parts
that will come into contact with food in the manner de-
scribed in the cleaning section.
• Prepare the appliance according to the function you wish
to use.
USE
• Unroll the cable completely before plugging it in.
• Prepare the appliance with the accessory required ac-
cording to the food to be prepared.
• Cut all foods into pieces (sinewless, boneless and fatless
meats are recommended, approximate size: 20 x 20 x 60
mm) so that they fit easily into the tray opening.
• Connect the appliance to the mains.
• Turn the appliance on by selecting position 1 on the
switch buttons.
• Feed food into the tray using only the food pusher to
introduce it into the mincing head.
ONCE YOU HAVE FINISHED USING THE APPLIANCE
• Turn the appliance off using the on/off switch. Select the
"0" position.
• Unplug the appliance from the mains.
• Clean the appliance.
ACCESSORIES
CUTTING PLATES (J)
• These cutting plates allow mincing meat with a coarser
or finer texture depending on the size of the holes of the
disc.
• Press the lock button (C), hold the head and insert it into
the inlet. When inserting, please pay attention that the
head must be slanted as per the arrow indicated on the
top. (Fig. 1). Then move the head anticlockwise so that
the head is fastened tightly. (Fig. 2).
• Insert the screw through the outlet mouth of the mincing
head. (Fig. 3).
• Place the cutting blade into the screw with the cutting
edge pointing to the front. (Fig. 4). If it is not fitted proper-
ly, the meat will not be minced.
• Insert one of the three cutting plates next to the cutting
blade, fitting the outlets of the cutting plate in the notches
of the outlet mouth edge of the mincing head. (Fig. 5).
• Screw the fixing ring tightly in the outlet mouth of the
mincing head, turning clockwise to fit the screw, blade
and cutting plate. (Fig. 6).
7