Cisco TelePresence MX Series Administrator's Manual page 56

Cisco TelePresence MX Series
Contents
Conference [1..1] Multipoint Mode
Define how the video system handles multiparty video conferences.
If registered to a Cisco TelePresence Video Communication Server (VCS), the video system
can use the MultiWay network solution. MultiWay requires that the video network includes
a multipoint control unit (MCU). If registered to a Cisco Unified Communications Manager
(CUCM), the video system can use the CUCM conference bridge. Both Multiway and the CUCM
conference bridge allows you to set up conferences with many participants.
Requires user role: ADMIN
Value space: <Auto/Off/MultiWay/CUCMMediaResourceGroupList>
Auto: If the MultiWay service is available, MultiWay is used for multiparty conferences. If the
service is not available, Multipoint Mode is set to Off automatically.
Off: Multiparty conferences are not allowed.
MultiWay: Multiparty conferences are set up using MultiWay. The Multipoint Mode will be
set to Off automatically if the MultiWay service is unavailable, for example when a server
address is not specified in the NetworkServices MultiWay Address setting.
CUCMMediaResourceGroupList: Multiparty conferences (ad hoc conferences) will be hosted
by the CUCM configured conference bridge. This setting is provisioned by CUCM in a CUCM
environment and should never be set manually by the user.
Conference 1 Multipoint Mode: Auto
Example:
Conference [1..1] IncomingMultisiteCall Mode
Select whether or not to allow incoming calls when already in a call/conference.
Requires user role: ADMIN
Value space: <Allow/Deny>
Allow: You will be notified when someone calls you while you are already in a call. You can
accept the incoming call or not. The ongoing call may be put on hold while answering the
incoming call; or you may merge the calls (requires MultiSite or MultiWay support).
Deny: An incoming call will be rejected if you are already in a call. You will not be notified
about the incoming call. However, the call will appear as a missed call in the call history list.
Conference 1 IncomingMultisiteCall Mode: Allow
Example:
D14850.05 MX Series Administrator Guide TC6.1, APRIL 2013.
Introduction Web interface System settings System settings
www.cisco.com — Copyright © 2011–2013 Cisco Systems, Inc. All rights reserved.
56
Administrator Guide
Setting passwords Appendices