Black & Decker BL0876 Series Use And Care Manual page 20

IN ST R U CTI ON S FOR USE
•
This appliance is intended for household use only.
GETTING STARTED
•
Remove all packing material, any stickers from the product, and the plastic
band around the plug.
•
Remove and save literature.
•
Wash all removable parts as instructed in Care & Cleaning Section of this
manual.
BLENDER JAR ASSEMBLY
1.
Turn blending jar upside down and place flat on
countertop or work surface.
2. Place the gasket against the glass jar.
Important: Gasket MUST be between the jar and
blade assembly or the blender will not function
properly.
3.
Place the blade assembly, blade first,
into the jar (A).
4. Place jar base onto jar and rotate clockwise
until it is tight (B).
5. Turn assembled jar right side up.
6.
Place lid with lid cap onto blending jar.
Note: Do not plug in the cord.
7. Place jar on base, making sure it is pressed
firmly into place. (Jar base should not extend
more than 1/8-inch above the rim at the top of
the base.)
20
BL0876_77Series_30117_SE_IB_B.indd 20 BL0876_77Series_30117_SE_IB_B.indd 20
A
B
9/12/23 11:36 AM 9/12/23 11:36 AM