Identification Of Parts - Zanussi ZD2023 User Manual

IDENTIFICATION OF PARTS

Dryer mode(optional)
The unit can make the MAX dehumidification function when it is under the Dryer mode. The fan speed is fixed
at high fan speed. The humidity level is automatically controlled according to the actual room humidity.
NOTE:
The Dryer mode must be operated in a close room,do not open the door and window.
To make the best effective dehumidification ,please first dehydrate the wet clothes.
Make sure to direct airflow at the wet clothes (See Fig.A).
For thick and heavy wet clothes may not get the best effective dehumidification .
CAUTION
Do not cover the air outlet of the unit with clothes. It may cause excessive heat, fire or failure of unit.
,
Do not place the wet clothes on the top of the unit and do not make the water drop into the unit. It may cause
creepage or failure of unit .
electric shock
Identification of parts
Louver
1
2
Control panel
Humidity Indicator light
3
4
Handle (both sides)
Rear
Winding board
1
Air intake grille
2
3
Drain hose outlet
4
Water bucket
5
Water level window
Caster
6
NOTE: All the pictures in the manual are
for explanation purposes only. The actual
shape of the unit you purchased may be
slightly different, but the operations and
functions are the same.
30-50CM
30- 50CM
AIRFLOW
Allow 30-50cm of distance
on the top and right side of
the unit to the wet clothes.
Front
6
Fig.A
Humidity Indicator light
This is an indicator of
the current air humidity,
Red: Humidity more
than 70%,
Green:Humidity between
50%-70%,
Blue: Humidity below 50%
1
2
3
4
Fig.2
1
2
3
4
5
6
Fig.3