Figure 5-16 Aspan Sample Data Sheet; Figure 5-17 Aspan Command Display - NEC NEAX 2400 IMX Manual

STEP 3: ASPAN
Assign special access code data for the Telephone Numbers using the ASPAN command.
SRV=TELN is the data for Telephone Numbers.
- ASPAN Data Sheet (example)
- NCN (Node A)
TN = 1 ACC = 4
TN = 1 ACC = 4
ASPAN (Assignment of Special Access Code Data for Network Data Memory)
1st DC
TN
1
SRV
TELN
Note: Available SRV is Telephone Number only. For more information, see the "Office Data Specification".
Note: The Numbering Plan data for the LDM and/or NDM cannot use separate Tenant Numbers (TN). Therefore,
be sure to assign the following data on the ASYDL command.
• ASYDL command, SYS1, INDEX 800
b1 = 1 (ASPAL command tenant data table development on LDM = Common)
b2 = 1 (ANPDL command tenant data table development on LDM = Common)
CI = N (Normal)
CI = H (Hooking)

Figure 5-16 ASPAN Sample Data Sheet

CI
N
4
NND
6

Figure 5-17 ASPAN Command Display

ND-70185 (E)
Get other manuals https://www.bkmanuals.com
Assignment of Numbering Data for Telephone Numbers
SRV (Kind of Service)
TELN: Telephone Number
SRV = TELN NND = 6
SRV = TELN NND = 6
ACC (Access Code): max 6 digits
CI (Connection Index)
SRV (Kind of Service)
NND (Maximum Number of Digits):
DATA PROGRAMMING
Telephone Number
4 x x x x x
6 digits
N: Normal
H: Hooking
B: Busy
Note
TELN: Telephone Number
1 - 16 (digits)
CHAPTER 5
Page 69
Revision 3.0