NEC NEAX 2400 IMX System Manual
  1. Manuals
  2. Brands
  3. NEC Manuals
  4. Music Mixer
  5. NEAX 2400 IMX
  6. System manual
NEC NEAX 2400 IMX System Manual

NEC NEAX 2400 IMX System Manual

Direct station selection (dss) console
Hide thumbs Also See for NEAX 2400 IMX:
Table of Contents

Advertisement

Quick Links

Download this manual
ND-70684 (E)
ISSUE 1
STOCK # 200863
®
Direct Station Selection (DSS) Console
System Manual
AUGUST, 1999
NEC America, Inc.

Advertisement

Table of Contents
loading

Related Manuals for NEC NEAX 2400 IMX

Summary of Contents for NEC NEAX 2400 IMX

  • Page 1 ND-70684 (E) ISSUE 1 STOCK # 200863 ® Direct Station Selection (DSS) Console System Manual AUGUST, 1999 NEC America, Inc.
  • Page 2 NEC America, Inc. reserves the right to change the specifications, functions, or features, at any time, without notice. NEC America, Inc. has prepared this document for use by its employees and customers. The information contained herein is the property of NEC America, Inc.

  • Page 3: Table Of Contents

    ND-70684 (E) ISSUE 1 AUGUST, 1999 NEAX2400 IMX Direct Station Selection (DSS) Console System Manual TABLE OF CONTENTS Page CHAPTER 1 OVERVIEW ..........................1 1. General ..............................1 2. How to Follow This Manual ........................2 3. DSS Console Modes..........................3 Direct Station Selection/Busy Lamp Field (DSS/BLF ) Mode .............
  • Page 4 This page is for your notes. TABLE OF CONTENTS ND-70684 (E) Page ii Revision 1.0...
  • Page 5 LIST OF FIGURES Figure Title Page Figure 1-1 Outer View of DSS ............. 1 Figure 1-2 Direct Station Selection (DSS)/Busy Lamp Field (BLF) Mode .
  • Page 6 LIST OF FIGURES ND-70684 (E) Page iv Revision 1.0...
  • Page 7 LIST OF TABLES Table Title Page Table 1-1 Relationship between the Mode Designation and the Mounting Level Numbers....4 Table 1-2 System Specifications for DSS ........... 5 Table 1-3 Cable Distance Limitations.
  • Page 8 This page is for your notes. LIST OF TABLES ND-70684 (E) Page vi Revision 1.0...

  • Page 9: Chapter 1 Overview

    CHAPTER 1 OVERVIEW 1. General This manual provides technicians with information about the Direct Station Selection (DSS) console shown in Figure 1-1 below. To complete installation tasks, refer to the NEAX2400 IMX Installation Manual for the PBX system to which the DSS console is connected. When the DSS console is located in a Distributed Access Unit (DAU), the NEAX2400 IMX Installation Manual for the DAU is also required.

  • Page 10: How To Follow This Manual

    OVERVIEW How to Follow This Manual 2. How to Follow This Manual The contents of this manual are: • CHAPTER 1 (OVERVIEW) This chapter explains how the DSS console is used, and the system specifications for the DSS. • CHAPTER 2 (INSTALLATION PROCEDURE) This chapter explains how to install a DSS console and contains cabling diagrams showing how to connect the console to a PBX.

  • Page 11: Dss Console Modes

    OVERVIEW DSS Console Modes 3. DSS Console Modes The DSS can be used as a Direct Station Selection/Busy Lamp Field (DSS/BLF) or an Add-On Module depend- ing on the following two factors: • Level Number (even or odd) of the allocated LENs for the DSS console •...

  • Page 12: Add-On Module (Adm) Mode

    OVERVIEW DSS Console Modes 3.2 Add-On Module (ADM) Mode term In this mode, a DSS console is used to expand the Line/Feature Access keys of a D . In addition to the term existing Line/Feature Access keys on each D , the DSS console has a maximum of 60 keys.

  • Page 13: Dss Specifications

    OVERVIEW DSS Specifications 4. DSS Specifications System specifications for the DSS are shown in Table 1-2. Table 1-2 System Specifications for DSS ITEM SPECIFICATIONS × 60 Number of KEYs × 60 (RED) × 60 (GREEN) Number of Light Emitting Diodes (LEDs) Power Source AC 100 Volt ±...

  • Page 14: General Service Conditions

    OVERVIEW General Service Conditions As shown in Figure 1-4, the cable distance allowed includes the 25-pair installation cable. Station Wire 0.4 mm (.051 in) (26 AWG) 0.5 mm (.019 in) (24 AWG) DSS Console Champ Connector 25-Pair installation cable Rosette Cable Distance between PBX and DSS REAR VIEW Figure 1-4 Cable Distance Definition...

  • Page 15: Dss/Blf

    OVERVIEW DSS/BLF term Multiple D s cannot use one DSS console. Circuit cards for the DSS are as follows: • PA-16ELCJ • PA-DAIG-A (DAI) • PA-DAIJ-A (DAI) The previous conditions also apply when a Distributed Access Unit (DAU) is used between the PBX and the DSS.

  • Page 16: Figure 1-6 Port Designation For Dss/Blf Mode

    OVERVIEW DSS/BLF As an example, Figure 1-6 shows a DSS/BLF connected to Port 0 on an ELC card. In this instance, no terminal can be wired to Port 1. The DSS/BLF mode can only use an even-numbered level. • Only even-numbered level is applicable to the DSS/BLF mode. •...

  • Page 17: Figure 1-7 Dss Key Allocation (Dss/Blf)

    OVERVIEW DSS/BLF Key Numbers (KYN: 1-40), which appear in the AKYD command, correspond to the 60 DSS keys as shown below. As an example, Figure 1-7 shows DSS/BLF connected to LV 0. DSS/BLF KYN of • The DSS Console is physically connected to the even- KYN of AKYD numbered LV.

  • Page 18: Add-On Module

    OVERVIEW Add-On Module The following features cannot be used when a DSS/BLF console encounters a busy station. • CALL BACK • CALL WAITING • EXECUTIVE RIGHT-OF-WAY • STEP CALL A station user cannot activate the following features for an incoming call from a DSS/BLF console. Note •...

  • Page 19: Figure 1-8 Example Of Port Designation For Add-On Module

    OVERVIEW Add-On Module As an example, Figure 1-8 shows an Add-On Module connected to Port 1 on an ELC card. In this instance, the term associated D must be assigned to Port 0. • Only odd-numbered level is applicable to Add-On Modules. term •...

  • Page 20: Figure 1-9 Line/Feature Access Key Allocation (Add-On Module)

    OVERVIEW Add-On Module term To designate the meaning of the upper 24 keys on an Add-On Module, FKYs 17 through 40 of the D that works in combination with the DSS are used. The remaining 36 keys on the Add-On Module are assigned using FKYs 5 through 40 of the original port of the Add-On Module.
  • Page 21 OVERVIEW Add-On Module The following Line/Feature keys must be assigned for KYNs 1 through 24: • MESSAGE REMINDER (FKY = 6) term • My Line and/or Prime Line of the master D KYNs 49 through 60 cannot be assigned for line features. (I-USE INDICATION, I-HOLD INDICATION can not be used since these keys are not equipped with LEDs.) To assign Speed Calling-One Touch (FKY = 49), use KYNs 1 through 16 and 25 through 52, since the memory area is retained for these KYNs only.
  • Page 22 This page is for your notes. CHAPTER 1 ND-70684 (E) Page 14 Revision 1.0...

  • Page 23: Chapter 2 Installation Procedure

    CHAPTER 2 INSTALLATION PROCEDURE This chapter describes the installation procedure for the DSS console. It includes a connection diagram and the locations of the cable leads. 1. Connection Diagram for DSS/BLF When the DSS console is used as a DSS/BLF, connect the associated cables referring to Figure 2-1.

  • Page 24: Connection Diagram For The Add-On Module

    INSTALLATION PROCEDURE Connection Diagram for the Add-On Module 2. Connection Diagram for the Add-On Module When the DSS console is used as an Add-On Module, connect the associated cables referring to Figure 2-2. Connection Diagram Modular Rosette LT Connector Installation Cable term Modular Rosette...

  • Page 25: Cable Lead Location

    INSTALLATION PROCEDURE Cable Lead Location 3. Cable Lead Location The leads appear as shown below. Figure 2-3 illustrates an example of cable lead locations. For more detailed information on each card, see the NEAX2400 IMX Circuit Card Manual and/or the NEAX2400 IMX DAU Sys- tem Manual.
  • Page 26 This page is for your notes. CHAPTER 2 ND-70684 (E) Page 18 Revision 1.0...

  • Page 27: Chapter 3 Data Programming

    CHAPTER 3 DATA PROGRAMMING This chapter describes how to program office data associated with the DSS. 1. DSS/BLF This section covers how to assign Office Data for a DSS/BLF. A sample data assignment is shown in Figure 3- term 1. In this example the DSS/BLF and the D are assigned as follows: TERMINAL LINE EQUIPMENT NUMBER (LEN)

  • Page 28: Data Programming Procedure (Dss/Blf)

    DATA PROGRAMMING Data Programming Procedure (DSS/BLF) 2. Data Programming Procedure (DSS/BLF) When assigning DSS/BLF data, perform the following procedure. “X” indicates the value should be tailored to the existing system. STEP 1: ASYD Assign the DSS/BLF to an even-numbered LEN level. (In this example LV 0 is used.) STN : LEN : 0 0 0 1 0 0...
  • Page 29 DATA PROGRAMMING Data Programming Procedure (DSS/BLF) term KYN 2 must be programmed as the associated D station. = Multi Line = Line term Associated D Assign desired station numbers to the corresponding DSS keys on the console. In this instance, KYNs 10-39 are used.

  • Page 30: Figure 3-2 Dss Key Assignment For Dss/Blf

    DATA PROGRAMMING Data Programming Procedure (DSS/BLF) Use KYNs 10-39 of an even-numbered LEN level (0, 2, 4, 6) for programming the upper 30 DSS keys on the DSS/BLF Use KYNs 10-39 of an odd-numbered LEN level (1, 3, 5, 7) for programming the lower 30 DSS keys on the DSS/BLF Figure 3-2 DSS Key Assignment for DSS/BLF CHAPTER 3...

  • Page 31: Example Of Data Programming For Dss/Blf

    DATA PROGRAMMING Data Programming Procedure (DSS/BLF) 2.1 Example of Data Programming for DSS/BLF 2.1.1 ASDT LINE EQUIPMENT TELEPHONE ROUTE SERVICE TENANT STATION NUMBER EQUIPMENT RESTRICTION FEATURE NUMBER NUMBER (LENS) CLASS CLASS CLASS REMARKS (TN) (STN) (TEC) (RSC) (SFC) 1-63 Max. 5 Digits 1-31 0-15 0-15...

  • Page 32: Akyd

    DATA PROGRAMMING Data Programming Procedure (DSS/BLF) 2.1.2 AKYD The following table shows DSS key assignment for even-numbered LV (2n). MY LINE TENANT STATION NUMBER NUMBER (TN) (STN) PRIME LINE MESSAGE LINE LINE ALLOW LINE PRIORITY WAITING PREFERENCE PREFERENCE TYPE OF OG FROM LINE PREFERENCE...
  • Page 33 DATA PROGRAMMING Data Programming Procedure (DSS/BLF) MY LINE TENANT STATION NUMBER NUMBER (TN) (STN) PRIME LINE MESSAGE LINE LINE ALLOW LINE PRIORITY WAITING PREFERENCE PREFERENCE TYPE OF OG FROM PREFERENCE DATA LINE term PRIME FOR ANSWER TENANT ANSWERING CALL DISPLAY PREFERENCE SPEAKER OUTGOING...
  • Page 34 DATA PROGRAMMING Data Programming Procedure (DSS/BLF) The following table shows DSS key assignment for odd-numbered LV (2n + 1) MY LINE TENANT STATION NUMBER NUMBER (TN) (STN) PRIME LINE MESSAGE LINE LINE ALLOW LINE PRIORITY WAITING PREFERENCE PREFERENCE TYPE OF OG FROM LINE PREFERENCE...
  • Page 35 DATA PROGRAMMING Data Programming Procedure (DSS/BLF) MY LINE TENANT STATION NUMBER NUMBER (TN) (STN) PRIME LINE MESSAGE LINE LINE ALLOW LINE PRIORITY WAITING PREFERENCE PREFERENCE TYPE OF OG FROM PREFERENCE DATA LINE term PRIME FOR ANSWER ANSWERING CALL DISPLAY PREFERENCE SPEAKER OUTGOING TENANT...

  • Page 36: Add-On Module

    DATA PROGRAMMING Add-On Module 3. Add-On Module This section covers how to assign an Add-On Module. In Figure 3-3, an Add-On Module and the associated term are assigned as follows: TERMINAL LINE EQUIPMENT NUMBER (LEN) STATION NUMBER (ST) Add-On Module 000101 Note term...

  • Page 37: Data Programming Procedure For Add-On Module

    DATA PROGRAMMING Data Programming Procedure for Add-On Module 4. Data Programming Procedure for Add-On Module When assigning Add-On Module data, perform the following procedure. “X” indicates the value should be tai- lored to the existing system. STEP 1: ASDT term Assign a D to an even-numbered LEN level.
  • Page 38 DATA PROGRAMMING Data Programming Procedure for Add-On Module Use the Add-On Module port to assign key information for the last 36 keys on the ADM. Buttons 1-39 are assignable PL TN term PL STN Enter the associated D as a PL STN = Off Hook Suppression is off LN PRE = Prime Line Pickup...

  • Page 39: Figure 3-4 Dss Key Assignment For Add-On Module

    DATA PROGRAMMING Data Programming Procedure for Add-On Module term Use KYNs 17-40 of the associated D for programming the first 24 Line/Feature access keys on the Add-On Module. Use KYNs 5-40 of the Add-On Module for programming the remaining 36 Line/Feature access keys on the Add- On Module.

  • Page 40: Example Of Data Programming For Add-On Module

    DATA PROGRAMMING Data Programming Procedure for Add-On Module 4.1 Example of Data Programming for Add-On Module 4.1.1 ASDT LINE EQUIPMENT NUMBER TELEPHONE ROUTE SERVICE TENANT STATION (LENS) EQUIPMENT RESTRICTION FEATURE NUMBER NUMBER CLASS CLASS CLASS REMARKS (TN) (STN) (TEC) (RSC) (SFC) 1-63 Max.
  • Page 41 DATA PROGRAMMING Data Programming Procedure for Add-On Module MY LINE TENANT STATION NUMBER NUMBER (TN) (STN) term 200 (= D LINE PRIME LINE ALLOW MESSAGE LINE LINE PREFERENCE PRIORITY WAITING PREFERENCE PREFERENCE TYPE FROM DATA LINE ANSWER ANSWERING PRIME DISPLAY PREFERENCE SPEAKER OUTGOING...
  • Page 42 DATA PROGRAMMING Data Programming Procedure for Add-On Module MY LINE TENANT STATION NUMBER NUMBER (TN) (STN) term 200 (= D LINE PRIME LINE ALLOW MESSAGE LINE LINE PREFERENCE PRIORITY WAITING PREFERENCE PREFERENCE TYPE FROM DATA LINE ANSWER ANSWERING PRIME DISPLAY PREFERENCE SPEAKER OUTGOING...
  • Page 43 DATA PROGRAMMING Data Programming Procedure for Add-On Module For Line/Feature access keys: KYNs 25-60 (Add-On Module) MY LINE TENANT STATION NUMBER NUMBER (TN) (STN) 201 (= Add- On Module) LINE PRIME LINE LINE PREFERENCE ALLOW MESSAGE LINE PREFERENCE TYPE PRIORITY WAITING PREFERENCE FROM...
  • Page 44 DATA PROGRAMMING Data Programming Procedure for Add-On Module MY LINE TENANT STATION NUMBER NUMBER (TN) (STN) 201 (= Add- On Module) LINE PRIME LINE ALLOW MESSAGE LINE LINE PREFERENCE PRIORITY WAITING PREFERENCE PREFERENCE TYPE FROM DATA LINE ANSWER ANSWERING PRIME DISPLAY PREFERENCE SPEAKER...

  • Page 45: Office Data Setting Sheets

    DATA PROGRAMMING Office Data Setting Sheets 5. Office Data Setting Sheets This section contains blank data setting sheets for commands used by DSS. You can use these sheets to plan your data before installing the DSS. 5.1 ASDT LINE EQUIPMENT NUMBER TELEPHONE ROUTE SERVICE...

  • Page 46: Akyd

    DATA PROGRAMMING Office Data Setting Sheets 5.2 AKYD MY LINE TENANT STATION NUMBER NUMBER (STN) (TN) PRIME LINE ALLOW MESSAGE LINE PRIORITY LINE LINE WAITING PREFERENCE LINE PREFERENCE PREFERENCE TYPE OF FROM DATA term ANSWERING PREFERENCE FOR SPEAKER FOR ANSWER TENANT STATION PRIME...
  • Page 47 DATA PROGRAMMING Office Data Setting Sheets MULTI LINE INTERCOM SERVICE FEATURE KIND OF RING GROUP KIND OF CONDITION KEY CODE LINE INFORMATION TENANT STATION NUMBER INCOM (KYI) (FKY) (KD) NUMBER NUMBER NUMBER (KYN) (ICM) 0 – 2 1-320 EACH LINE (TN) (STN) (G-ID)
  • Page 48 DATA PROGRAMMING Office Data Setting Sheets MY LINE TENANT STATION NUMBER NUMBER (STN) (TN) PRIME LINE ALLOW MESSAGE LINE PRIORITY LINE LINE WAITING PREFERENCE LINE PREFERENCE PREFERENCE TYPE OF FROM DATA term ANSWERING PREFERENCE FOR SPEAKER FOR ANSWER TENANT STATION PRIME DISPLAY OUTGOING...
  • Page 49 DATA PROGRAMMING Office Data Setting Sheets MULTI LINE INTERCOM SERVICE FEATURE KIND OF RING CONDITION KEY CODE LINE INFORMATION KIND OF GROUP ID NUMBER TENANT STATION (KYI) (FKY) (KD) INCOM NUMBER (KYN) NUMBER NUMBER 0 – 2 1-320 EACH LINE (ICM) (G-ID) (TN)
  • Page 50 This page is for your notes. CHAPTER 3 ND-70684 (E) Page 42 Revision 1.0...

Table of Contents