Advertisement
1
g018276
Figure 1
1. Bulkhead
4. Ensure that the roll bar pivot bolts and clamp bolts are
in place and are tight, and or the securing pins are in
place to retain the top hoop.
5. Remove the roll bar pivot bolt on the left side of the
machine.
6. Align the indicated hole in the left rear light bracket
with the hole in the roll bar and insert the new bolt
(M16 x 110 mm), using the existing washers
2
or
Figure
3).
2
2. Bolt (4)
(Figure
g018276
Machine with serial numbers 316999999 and lower
1. Bolt (M16 x 110 mm)
2. Existing washers
3. Orange indicator side up
Machine with serial numbers 400000000 to 999999999
1. Bolt (M16 x 110 mm)
2. Orange indicator side up
3. Left rear light bracket
3
Figure 2
4. Left rear light bracket
5. Roll bar
6. Nut (M16)
Figure 3
4. Roll bar
5. Existing washer
6. Nut (M16)
g197780
g196536
Advertisement
