Thermostat Overview - GE RAL163P1 Owner's Manual & Installation Instructions

Using your thermostat.
The digital programmable series of thermostats offers an
economical remote control solution for single-stage
heat/cool and multi-stage heat pump applications. System
selections include heat, cool, off or auto mode, as well as
fan on or fan auto selections.

Thermostat Overview

Day indicator
AM/PM indicator
Hold indicator
Program indicator
System mode
indicator
Figure 1: RAK163P1 and RAK147P1 Display
2
Thermostats are available in the following selections:
RAK163P1 (1 heat/1 cool)
and
RAK147P1 (2 heat/1 cool heat pump)
General Features
FEATURE
No batteries required for general
operation.
24V AC/DC Compatible
Temperature Safety Circuit
°F or °C compatible
Backlit display
Programming Modes
Auto changeover from Heat to Cool
Display Description
LCD SEGMENT
Set temp indicator
Day indicator
Time display
AM/PM indicator
Time display
Celsius mode
indicator
Program indicator
Temperature
display
Fan mode
Hold indicator
indicator
System mode indicator
Fan mode indicator
Temperature display
Set temp indicator
Celsius mode indicator
Get other manuals https://www.bkmanuals.com
DESCRIPTION
Saves programmed setpoints in the
event of a power loss.
Switch selection for either 24 VAC or
24 VDC operation.
Auto cut-off in heat mode if room
temperature > 90°F and auto cut-off
in cool mode if room temperature
< 60°F.
Switch selection for either Fahrenheit
or Celsius degrees.
Display is backlit whenever a button
is pressed.
5+2- and 7-day programming
flexibility.
Automatically changes from heating
to cooling.
DESCRIPTION
Indicates the day of week.
Indicates AM or PM.
Displays time, program time or set temperature.
Indicates the operating or editing program
(Morning, Day, Evening and Night), flashes when
temporary hold.
Indicates that the thermostat is in hold mode.
Shows whether heat, cool, auto or off system is
selected and operating.
Indicates that the fan is in ON or Auto mode.
Displays room temperature, program
temperature or span.
Indicates that the set temperature is shown.
Indicates that the temperature displayed is in
Celsius scale. Default is Fahrenheit.