Thermostat Installation; Installing The Wireless Control Card - GE RAK180W1 Owner's Manual & Installation Instructions

Installing the Wireless Control Card

• Power off the Zoneline
• Insert the Control Card wiring harness into the thermostat
connection port on the front of the Zoneline control box
cover.
• For Makeup Air Models (*DBM and *EBM), insert the
small connector into the mating CDC Connection port next
to the thermostat port. (See Drawing 1)
NOTE: If not a Makeup Air Model, DO NOT plug in the CDC/
occupancy connection.
AC input
49-5000416 Rev. 0

Thermostat Installation

Drawing 1
Red Aux Set
Button
Remote
Thermostat
Connection
CDC /
Occupancy
Connection
7