AEG DVD 4626 iP Instruction Manual page 47

Fig. 2/23
Connecting the Audio cable
Fig. 2/26, 27
Fig. 2/16
Composite-Video
Composite-Video is used to transmit both Video data.
1. Plug the Composite-Video jack into the socket on the back of the
player.
2. Plug the Composite-Video jack into the corresponding socket on your
playback device.
You can choose from three transmission methods for audio signals.
You must generally choose first whether you would like to have the
sound coming from your TV, or through a Stereo or 2.1-Amplifier. The
Audio cable must then be connected to the TV or an amplifier accord-
ingly.
NOTE:
If your amplifier is equipped with a digital output, you should use the
amplifier. You will experience a much better audio quality, and the
installation is much easier.
Stereo
Connect both Audio cables for the right and the left speakers to your
playback device or your amplifier.
1. Plug the Audio jacks into the sockets on the back of the player
(R/L). Plug the audio cable for the subwoofer into the (SUB) jack on
the back of the unit.
2. Plug the Audio jacks into the corresponding sockets on your play-
back device or your amplifier.
NOTE:
The 2.1 CH AUDIO OUT outputs are fixed and are not changed by the
volume control of the Music Center.
2.1-Audio signal (Connecting the Loudspeakers Supplied)
Connect the SPEAKERS/SUBWOOFER connection on the rear of the DVD
player to the corresponding connections on the rear of the individual
loudspeakers.
Proceed as follows:
1. Connect the end of the cable to the socket on the rear of the device.
Please ensure the correct coniguration:
- (1) Connection for Subwoofer: Bass
- (2) Speaker front left
- (3) Speaker front right
ENGLISH
47