3.2 SIP Related Function Setup
In this section, you set up your own SIP settings. When you apply for an account,
your SIP service provider will give you an Username, and SIP Registrar. Then
you can tell your folks your SIP Address as in Username @ SIP Registrar
Please set each field in the SIP and Ports Settings accordingly. Click OK to
apply settings.
The detail explanation of the SIP and Port settings window:
Set the port number for sending/receiving SIP message for building
SIP Port
a session. The default value is 5060. Your peer must set the same
value in his/her Registrar.
Set the domain name or IP address of the SIP Registrar server.
Registrar
With the Registrar domain entered above, tick this box to let the
Use Registrar
Vigor2500V/2510V series use the SIP Registrar.
Enter your account name of SIP Address, e.g. every text before @.
Username
The password provided to you when you registered with a SIP
Password
service.
The time duration that your SIP Registrar server keeps your
Expire Time
registration record. Before the time expires the Vigor2500V/2510V
series will send another register request to SIP Registrar again.
In the "VoIP Call Status" you will find an "R" indicating you have registered with
your SIP server.
16