Table of Contents
Advertisement
MAINTENANCE
Under the Hood
1.5-liter models
Engine Oil Fill Cap
U.S. models
Washer Fluid
(Blue Cap)
Reserve Tank
Reserve Tank Cap
Engine Oil Dipstick
(Orange)
2.0-liter models
Washer Fluid
(Blue Cap)
Reserve Tank
Reserve Tank Cap
Engine Oil Fill Cap
134 |
Opening the Hood
1. Park the vehicle on a level surface and set the
Brake/Clutch * Fluid
2. Pull the hood release handle under the lower left
(Black Cap)
Canadian models
Washer Fluid
(Blue Cap)
3. The hood latch lever is left of center. Slide the
Battery
4. Remove the support rod from the clamp using the
Brake/Clutch Fluid
(Black Cap)
Battery
NOTICE
Do not open the hood when the wiper arms are raised. The hood will strike the
Engine Oil Dipstick
(Black)
wipers and may damage either the hood or the wipers.
Turbocharger Precautions
The engine uses an exhaust-driven turbocharger to generate extra power. The
turbocharger is a precision device that can spin at over 100,000 rpm and reach
temperatures over 1,292F (700C). It is lubricated and cooled by engine oil. Be sure to
follow these precautions to help prevent turbocharger damage.
• Always change the engine oil according to the Maintenance Minder.
• Always allow the engine to warm before revving it or accelerating in a spirited
way.
parking brake.
corner of the dashboard.
hood latch lever to the right to release the lock
mechanism and open the hood.
grip. Mount the support rod in the hood.
When closing, remove the support rod and
stow it in the clamp, then gently lower the hood.
Remove your hand at a height of approximately
12 inches (30 cm) and let the hood close.
MAINTENANCE
Hood Release Handle
Pull
(centerline)
Hood Release
Lever
Support Rod
Grip
Clamp
| 135
Advertisement
Table of Contents
