Honda Accord 2012 Owner's Manual page 96

Main Menu Table of Contents
As required by the FCC:
This device complies with Part 15 of the
FCC rules. Operation is subject to the
following two conditions: (1) This device
may not cause harmful interference, and
(2) this device must accept any
interference received, including
interference that may cause undesired
operation.
Changes or modifications not expressly
approved by the party responsible for
compliance could void the user's
authority to operate the equipment.
This device complies with Industry
Canada Standard RSS-210.
Operation is subject to the following two
conditions: (1) this device may not cause
interference, and (2) this device must
accept any interference that may cause
undesired operation of the device.
Recalling a Memorized Driving
Position
U.S. EX-L V6
Canadian EX-L and EX-L V6 with
navigation system
When you unlock the driver's door
with your remote transmitter, each
remote transmitter activates the
customized settings related to that
remote.
Remote Transmitter
The driving position memory
activated (Driver 1, Driver 2) is
shown on the back of each
transmitter. Make sure you store
your desired driving position in the
memory that is activated by the
transmitter you normally carry.
Here are the settings activated with
the remote:
Driving position memory
(see page 103 ).
Auto Door Locking/Unlocking
(see page 82 ).
When you unlock and open the
driver's door with the remote
transmitter, the driver's seat (except
the power lumbar feature) starts to
move to the positions stored in
memory. The indicator in the related
memory button comes on.
91