Honda Accord 2012 Owner's Manual page 370

Main Menu Table of Contents
ELECTRICAL
CONNECTOR TAB
2. Remove the electrical connector
from the bulb by pushing on the
tab to unlock it, then slide the
connector off the bulb.
3. Remove the bulb by turning it
about one-quarter turn
counterclockwise.
HOLDING CLIPS
4. Driver's side
To change the bulb, start the
engine, turn the steering wheel all
the way to the right, then turn off
the engine.
5. Use a flat-tip screwdriver to
remove the two holding clips from
the inner fender, and pull the inner
fender cover back.
ELECTRICAL CONNECTOR
6. Remove the electrical connector
from the bulb by pushing on the
tab and pulling the connector
down.
7. Remove the bulb from the fog
light assembly by turning it one-
quarter turn counterclockwise.
Lights
TAB
CONTINUED
365