Honda Accord 2013 Owner's Manual page 79

Main Menu
uuIndicatorsu
Indicator Name
Comes on for a few seconds
●
when you change the power
mode to ON, then goes off.
Comes on when you have
●
customized FCW to turn off.
Comes on if there is a problem
●
with the FCW system.
Models with information display
Blinks when the system detects
●
a likely collision with a vehicle
in front of you. The beeper
sounds.
Forward
All models
Collision
Comes on when the FCW
●
Warning
system shuts itself off.
(FCW)
Indicator *
*1:On the left: Models with information display On the right: Models with multi-information display
* Not available on all models
78
Table of Contents
On/Blinking
Stays on constantly without FCW off - Have the vehicle
●
checked by a dealer.
Blinks while driving - Take appropriate action to prevent
●
a collision (apply the brakes, change lanes, etc.).
Models with information display
Stays on - The temperature inside the FCW system is too high.
●
The system activates when the temperature inside the system
cools down.
2 Automatic shutoff P. 460
Stays on - The radar sensor or the area around the camera is
●
blocked by dirt, mud, etc. Stop your vehicle in a safe place, and
wipe it off with a soft cloth.
Have your vehicle checked by a dealer if:
●
Models with multi-information display
The indicator and message stay on after you cleaned the
radar sensor cover.
Models with information display
The indicator and message come back on after you cleaned
the area around the camera.
2 Automatic shutoff P. 460
2 Automatic shutoff P. 460
Explanation Message *1
— —
—
— —