Table of Contents
Advertisement
Main Menu
Compass
*
When you set the power mode to ON, the compass self-calibrates, and the compass
display appears.
Compass Calibration
If the compass indicates the wrong direction, or the CAL indicator blinks, you need
to manually calibrate the system.
* Not available on all models
414
Table of Contents
1. Set the power mode to ON.
2. On the top screen of any audio source,
press and hold
for 5 seconds.
The display switches to the Compass
u
Settings screen.
3. Rotate
to select Calibration, then press
.
4. When the display changes to Calibration
Start, press
.
5. Drive the vehicle slowly in two circles.
u
The compass starts to show a direction
after the calibration. The CAL indicator
goes off.
*
1Compass
Compass operation can be affected under the
following conditions:
•
Driving near power lines or stations
•
Crossing a bridge
•
Passing a large vehicle, or driving near a large
object that can cause a magnetic disturbance
•
When accessories such as antennas and roof racks
are mounted by magnets
1Compass Calibration
Calibrate the compass in an open area.
While setting the compass, press the BACK button to
cancel the setting mode and return to the previous
screen.
Advertisement
Chapters
Table of Contents
