Table of Contents
Advertisement
Section 9 – Specifications
9.1 General
Range:
Accuracy:
Resolution:
Operating Environment:
RTD Probe/Sensor Input: Pt100, 3-wire
Display Type:
Display Digits:
Character Height:
Computer Interface:
Sample/Display Rate:
Battery Power:
External Power:
Battery Life (Typical):
Analog Output:
Enclosure:
Enclosure Finish:
Enclosure Rating:
Enclosure Screw Torque:
Dimensions:
Weight:
Settings (USB/Software)
Units:
Lock:
Alarms:
Backlight:
Backlight Color:
-51 to 538°C (-60 to 1000°F)
±0.2°C (±0.3°F) or ±0.1% of reading, Whatever
greater
0.1°C (0.1°F)
-40 to 70°C (-40 to 158°F); 5 to 100% RH non-
condensing
LCD with selectable backlight
4 digits, 9999 counts
25.4 mm (1.0 in)
USB (one programming cable included)
1/second default, user adjustable from 1/0.375 sec.
to 1/30 sec.
One or two 3.6V lithium, 8.5Ah capacity (C-cell)
one included, (Omega Replacement Part No. BATT-
C-3.6V)
12 to 24 Vdc (required for analog output operation)
See section 6.4
User selectable 0 to 5 Vdc, 0 to 10 Vdc, or 4 to 20
mA; Requires external 12 to 24 Vdc power supply
for operation
316 Stainless Steel housing, ABS center gasket
Brushed 316 Stainless Steel
NEMA4X
9 in-lb ±10%
4.53" H*, 4.52" W, 2.92" D
(*height not including sensor)
1.59 lbs.
°C, °F, °K, °R
Allows for front button lock-out
User selectable high and low alarm limits
On/off, or 10 sec, 30 sec, 1 min, 5 min
Normal Operation – Green, Low Alarm – Blue, High
Alarm - Red
Specifications
9
9-1
Advertisement
Table of Contents
