Sharp AN-LS1 Operation Manual page 27

Please change the destination only when necessary. (In general, it is not necessary to change
the destination folder.)
If "Cancel" is clicked, "Exit Setup" dialog will be displayed.
If "Yes" is clicked, the Sharp COM Redirection Software Driver is not installed. If you want to
install later, run Sharp COM Redirection Software using "Add or Remove Programs".
Click "No" to continue the installation.
If no dialog box is displayed after waiting a while:
(1) Select "Run" from the "Start" menu.
(2) Input "R:\SOFTWARE\SETUP.EXE" and click "OK".
(If the CD-ROM drive is different from the R drive, please input the correct drive name.)
27