Sharp AN-LS1 Operation Manual page 17

Quit
Save settings and quit. ([S]Save & Quit)
Save set values and quit menu.
M The SETUP MENU
———————— S E T U P
[1]IP Address
[4]User Name
[6]RS-232C Baud Rate [7]Unit Name
[A]Advanced Setup
[V]View All Setting
setup>s
All Connection will be disconnect.
Continue(y/n)? y
Apply New setting...Done.
Quit without saving settings. ([Q]Quit Unchanged)
Quit menu without saving setting values.
M The SETUP MENU
———————— S E T U P
[1]IP Address
[4]User Name
[6]RS-232C Baud Rate [7]Unit Name
[A]Advanced Setup
[V]View All Setting
setup>q
Quit Without Saving(y/n)? y
Setting Unchanged.
M E N U ——————————
[2]Subnet Mask [3]Default Gateway
[5]Password
[D]Disconnect All
[S]Save & Quit [Q]Quit Unchanged
M E N U ——————————
[2]Subnet Mask [3]Default Gateway
[5]Password
[D]Disconnect All
[S]Save & Quit [Q]Quit Unchanged
17
Enter "s" and press the return key.
Enter "y" and press the return key.
Enter "q" and press the return key.
Enter "y" and press the return key.