Sharp AN-LS1 Operation Manual page 19

User Name Setting ([4]User Name)
Carrying out security protection using user name.
setup>4
User Name
Please Enter
(change)
User name can be up to 8 characters.
In the initial state, user name is not set.
Password Setting ([5]Password)
Carrying out security protection using password.
setup>5
Password
Please Enter
(change)
Password can be up to 8 characters.
In the initial state, the password is not set.
RS-232C Baud Rate Setting ([6]RS-232C Baud Rate)
Setting of baud rate for RS-232C (CONTROLLER and PROJECTOR) terminals.
setup>6
note: It sets both RS-232C (CONTROLLER) and RS-232C (PROJECTOR).
0 ...
1 ... 38400 bps
2 ... 115200 bps
Baud Rate Select[0-2] :1
RS-232C Baud Rate : 38400 bps
Baud Rates for the RS-232C (CONTROLLER) terminal and the RS-232C (PROJECTOR) terminal
cannot be set to different values.
:
: an-ls1
—> an-ls1
:
: sharppj
—> sharppj
9600 bps
19
Enter "4" and press the return key.
Enter user name and press the
return key.
Display set user name.
Enter "5" and press the return key.
Enter password and press the
return key.
Display set password.
Enter "6" and press the return key.
Select and enter the number 0, 1,
or 2 and press the return key.
Display set baud rate.