Table of Contents
Advertisement
1.
Connect the core end of the DV cable into the IEEE 1394 connector of the
computer.
2.
Connect the other end of the DV cable into the DV connector of the IEEE
1394 device.
3.
Install the driver according to the instructions on the screen. Generally when
you connect the device to the computer, the necessary driver will be installed
automatically.
4.
Start the appropriate application for handling your data.
Disconnecting IEEE 1394 Device
In Windows 2000
1.
Click Unplug or Eject Hardware icon (
2.
Click Stop xxxxx (xxxxx is the name of your IEEE 1394 device.).
3.
Click OK; then, remove the DV cable from the computer.
In Windows XP Professional
1.
Click the Safely Remove Hardware icon (
find the icon, click
to Step 3.
2.
If the name of your device appears, click Safely remove xxxxx (xxxx is the
name of your IEEE 1394 device.); then, Safe To Remove Hardware dialog
appears.
3.
Remove the DV cable from the computer.
IEEE 1394 connector
to show all kinds of icon. If the icon does not appear, go
To IEEE 1394 Compliant Device
) on the taskbar.
) on the taskbar. If you cannot
4
4-17
Advertisement
Table of Contents
