Makita DJR186 Technical Information page 3

2 CAUTION
Repair the machine in accordance with "Instruction manual" or "Safety instructions".
Follow the instructions described below in advance before repairing:
Wear gloves.
·
Remove the recipro saw blade from the unit.
·
In order to avoid wrong reassembly, draw or write down where and how the parts are assembled, and what are the parts.
·
It is also recommended to have boxes ready to keep disassembled parts by group.
Handle the disassembled parts carefully. Clean and wash them properly.
·
If some bolts and screws are too tight, use an impact driver.
·
Tighten the bolts and the screws to the specified torque.
·
3 NECESSARY REPAIRING TOOLS
Code No.
1R269 Bearing extractor
1R291 Retaining ring S and R pliers
Description
3 / 22
Use for
removing Ball bearings
removing Retaining ring S-12