Makita DJR186 Technical Information page 16

5-3-2-2 For DJR186
Fig. 5-3-2-2-1
[2] Set the U-shaped legs of Bearing retainer 66 into the
groove of Gear housing L assembly to assemble
Armature ass'y.
Note: If it is hard to assemble Armature ass'y, warm Gear
housing L assembly with a heat gun.
U-shaped legs of
Bearing retainer 66
Groove of Gear
housing L assembly
16 / 22
Fig. 5-3-2-2-2
[3] Align the notch of Yoke unit with the rib of Motor
housing, then set Yoke unit in place.
Yoke unit
Rib of Motor
housing
Notch of Yoke unit