Makita DJR186R Instruction Manual

Makita DJR186R Instruction Manual

Cordless recipro saw

Advertisement

Quick Links

INSTRUCTION MANUAL
Cordless Recipro Saw
DJR186
Read before use.

Advertisement

Table of Contents
loading

Summary of Contents for Makita DJR186R

  • Page 1 INSTRUCTION MANUAL Cordless Recipro Saw DJR186 Read before use.
  • Page 2: Specifications

    Intended use EC Declaration of Conformity For European countries only The tool is intended for sawing wood, plastic and fer- Makita declares that the following Machine(s): rous materials. Designation of Machine: Cordless Recipro Saw Noise Model No./ Type: DJR186...
  • Page 3: General Power Tool Safety Warnings

    Remove any adjusting key or wrench before General power tool safety warnings turning the power tool on. A wrench or a key left attached to a rotating part of the power tool may WARNING: result in personal injury. Read all safety warnings and all instructions.
  • Page 4 SAVE THESE INSTRUCTIONS. Under abusive conditions, liquid may be ejected from the battery; avoid contact. If con- tact accidentally occurs, flush with water. If WARNING: DO NOT let comfort or familiarity liquid contacts eyes, additionally seek medical with product (gained from repeated use) replace help. Liquid ejected from the battery may cause strict adherence to safety rules for the subject irritation or burns.
  • Page 5: Functional Description

    Insert it all the way until it locks in place causing fires, personal injury and damage. It will with a little click. If you can see the red indicator on the also void the Makita warranty for the Makita tool and upper side of the button, it is not locked completely. charger.
  • Page 6 Indicating the remaining battery capacity Only for battery cartridges with "B" at the end of the model number Fig.4 ► 1 . Lock-off button 2. Switch trigger To prevent the switch trigger from accidentally pulled, the lock-off button is provided. To start the tool, depress the lock-off button from B side and pull the switch trigger.
  • Page 7: Operation

    Insert the recipro saw blade into the blade clamp as far OPERATION as it will go. The blade clamp sleeve rotates and fixes the recipro saw blade. Make sure that the recipro saw blade cannot be extracted even though you try to pull CAUTION: Always press the shoe firmly it out. against the workpiece during operation.
  • Page 8: Optional Accessories

    Replacing carbon brushes OPTIONAL ACCESSORIES CAUTION: These accessories or attachments are recommended for use with your Makita tool specified in this manual. The use of any other accessories or attachments might present a risk of injury to persons. Only use accessory or attachment for its stated purpose.

This manual is also suitable for:

Djr186Djr186zDjr186rte

Table of Contents