Manual Tuning
■
Digital TV
Normally use
Auto Tuning
channels.
If tuning has not been done completely or for adjusting the direction of the
aerial, use this function.
All Digital TV channels found are added to
●
1. Select frequency and offset.
2. Press
OK
to search.
■
Analogue TV
Set Analogue TV channel manually after
Set
Sound System
●
Normally set
Colour System
1. Select the channel position with
2. Select the channel with
3. Set
Manual
Tuning.
4. Select
Store
and press
Use
Fine Tuning
●
programme (affected by weather conditions, etc.).
If a VCR is connected only with the RF cable, select channel position 0.
●
or
Update Channel List
and
Colour
System, and then perform this function.
to Auto.
Numeric
Channel Up /
OK
to set.
to make small adjustments to the tuning of an individual
- 98 -
to retune Digital TV
Channel
List.
Auto
Tuning.
buttons.
Down.