Table of Contents
Advertisement
Timer Programming
This function allows you to select programmes that you want to record to the
USB HDD.
1. Display
TV Guide
2. Select the forthcoming programme and press
To check / change / cancel a timer event
●
Recording > Timer Programming > Editing Timer Programming
LED turns to orange in Standby mode when
●
To return to
TV Guide
●
RETURN
If you select the current programme, a confirmation screen asking
●
whether you want to watch or record the programme appears. Select
Timer Programming
the time you finish the timer event setting.
= Note =
Not valid in Analogue TV
●
Timer Programming
●
received via the signal from the broadcaster or service provider.
Other channels in the same frequency band can be selected while the
●
recording of
Timer Programming
When recording programmes to the USB HDD, be sure to format the USB
●
HDD and enable it to record in
Recording > USB HDD setup
To set timer programming events of this TV on the network equipment
●
(smartphone, etc.) from outside the home network
Recording > Timer Programming > Remote recording
with GUIDE.
and press
OK
only works reliably if correct time information is
is in progress.
USB Device
- 92 -
OK
to access.
Timer Programming
to set
USB HDD Rec.
Setup.
is set.
to record from
Advertisement
Table of Contents
